Differences

This shows you the differences between two versions of the page.

--- bareos_power_on_off_sd [2017/02/18 18:52] – created herwarth
+++ bareos_power_on_off_sd [2017/02/18 19:09] (current) – herwarth
@@ Line 1: / Line 1: @@
+======Bareos SD power on/off======
 =====Introduction=====
-I have a SAS tapedrive connected to a dedicated server for backups. On this machine bareos-sd is running. I do not want the bareos-sd server powered on all the time when it is only backup-ping a litte time of the day. So I have made some scripts to power on and off the server.
+I have a SAS tapedrive connected to a dedicated server for backups. On this machine bareos-sd is running. I do not want the bareos-sd server powered on all the time when it is only backup-ping a litte time of the day.
+So I have made some scripts to power on and off the server.
 The server is a Supermicro machine with IPMI, so I am using ipmiutils to power on/off the machine.
+=====Powering off the SD=====
+The catalog backup runs with a lower priority so shutting down the server after the catalog backup makes sense. In a schedule I always end with creating a catalog backup. When the SD is powered down, I do not want to power it down again.
+=====Catalog backup=====
+<code - /etc/bareos/bareos-dir.d/job/catalog.conf>
+Job {
+  Name = catalog
+  Client = backup-mngt-bh
+  Type = Backup
+  Level = Full
+  Storage = disk-bh
+  Pool = disk
+  Messages = Standard
+  FileSet = catalog
+  Schedule = catalog
+  # Default
+  #RunBeforeJob = /usr/lib/bareos/scripts/make_catalog_backup
+  # Helux
+  RunBeforeJob = /usr/lib/bareos/scripts/make_catalog_backup.sh
+  # Default
+  #RunAfterJob  = "/usr/lib/bareos/scripts/delete_catalog_backup"
+  # Helux
+  RunAfterJob  = "/usr/lib/bareos/scripts/delete_catalog_backup.sh"
+#  Write Bootstrap = "|/usr/bin/bsmtp -h localhost -f \"\(Bareos\) \" -s \"Bootstrap for Job %j\" root@localhost" # (#01)
+  Priority = 11
+}
+</code>
+<code - /usr/lib/bareos/scripts/delete_catalog_backup.sh>
+#!/bin/sh
+#
+# BAREOS® - Backup Archiving REcovery Open Sourced
+#
+# Copyright (C) 2000-2011 Free Software Foundation Europe e.V.
+# Copyright (C) 2013-2014 Bareos GmbH & Co. KG
+#
+# This program is Free Software; you can redistribute it and/or
+# modify it under the terms of version three of the GNU Affero General Public
+# License as published by the Free Software Foundation and included
+# in the file LICENSE.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Affero General Public License for more details.
+#
+# You should have received a copy of the GNU Affero General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# This script deletes a catalog dump
+#
+#
+# Source the Bareos config functions.
+#
+. /usr/lib/bareos/scripts/bareos-config-lib.sh
+db_name="${db_name:-bareos}"
+working_dir=`get_working_dir`
+rm -f ${working_dir}/${db_name}.sql
+# added by Helux
+/usr/lib/bareos/scripts/poweroff_bareos_sd.sh
+</code>
+<code - /usr/lib/bareos/scripts/poweroff_bareos_sd.sh>
+#!/bin/bash
+BAREOS_SD_IP=172.16.2.23
+BAREOS_SD_PORT=9103
+IPMI_IP=172.16.2.18
+IPMI_USER=USER
+IPMI_PASS=PASSWORD
+SLEEP=5
+NUM_TRIES=6
+function check_bareos_sd {
+  nc -w1 $BAREOS_SD_IP $BAREOS_SD_PORT < /dev/null 2>/dev/null
+  if [ $? -eq 0 ]; then
+  # if return value is 0 then port is reachable so we can exit the function with value 0
+    return 0
+  else
+    return 1
+  fi
+}
+COUNT=0
+while true; do
+  check_bareos_sd
+  if [ $? -eq 0 ]; then
+    # We are online, so add 1 to counter, sleep for $SLEEP seconds and continue loop
+    # $COUNT=0 then we can power off the machine using ssh
+    if [ $COUNT -eq 0 ]; then
+      ssh -t $BAREOS_SD_IP sudo /usr/sbin/shutdown -h now
+    fi
+    let COUNT=$COUNT+1
+    sleep $SLEEP
+  else
+    # We are offline, so we can exit the loop
+    exit 0
+  fi
+  # check if $COUNT reaches $NUM_TRIES and when it does do a hard power down
+  if [ $COUNT -eq $NUM_TRIES ]; then
+    ireset -d -N $IPMI_IP -U $IPMI_USER -P $IPMI_PASS >/dev/null 2>&1
+    if [ $? -eq 0 ]; then
+      exit 0
+    else
+      exit 1
+    fi
+  fi
+done
+</code>
+=====Powering on the SD when running a job=====
+When I need to write a backup to the bareos-sd server, I need to power it on. But I do not want to power it on when it is already on. It is possible a job will be triggered with another job still running.
+<code - /etc/bareos/bareos-dir.d/job/example.conf>
+Job {
+  .
+  .
+  .
+  RunBeforeJob = /usr/lib/bareos/scripts/poweron_bareos_sd.sh
+}
+</code>
+<code - /usr/lib/bareos/scripts/poweron_bareos_sd.sh>
+#!/bin/bash
+BAREOS_SD_IP=172.16.2.23
+BAREOS_SD_PORT=9103
+IPMI_IP=172.16.2.18
+IPMI_USER=USER
+IPMI_PASS=PASSWORD
+SLEEP=5
+NUM_TRIES=24
+function check_bareos_sd {
+  nc -w1 $BAREOS_SD_IP $BAREOS_SD_PORT < /dev/null 2>/dev/null
+  if [ $? -eq 0 ]; then
+  # if return value is 0 then port is reachable so we can exit the function with value 0
+    return 0
+  else
+    return 1
+  fi
+}
+COUNT=0
+while true; do
+  check_bareos_sd
+  if [ $? -eq 0 ]; then
+    # We are online, so exit loop
+    exit 0
+  else
+    # We are offline, so add 1 to counter, sleep for $SLEEP seconds and continue loop
+    # $COUNT=0 then we can power on the machine using ireset (ipmiutil)
+    if [ $COUNT -eq 0 ]; then
+      ireset -u -N $IPMI_IP -U $IPMI_USER -P $IPMI_PASS >/dev/null 2>&1
+    fi
+    let COUNT=$COUNT+1
+    sleep $SLEEP
+  fi
+  # check if $COUNT reaches $NUM_TRIES and when it does exit with value 1
+  if [ $COUNT -eq $NUM_TRIES ]; then
+    exit 1
+  fi
+done
+</code>
+{{tag>linux}}

User Tools

Site Tools

Differences

Page Tools